| |
Bytac is a laminate consisting
of FEP film that is bonded to a support backing of either vinyl
or aluminum. The backing is coated with a pressure-sensitive,
acrylic adhesive. Bytac adheres to most surfaces and conforms
to minor irregularities.
Bytac provides an easy and economical way to protect bench tops, fume hood surfaces, temporary tables, walls/ceilings, splash screens and walls of spray booths with the non-stick, chemical-resistant features of fluoropolymer film. Corrosive chemicals, paint, oil, grease and sticky foods are easily removed by wiping with a damp sponge.
Bytac is easily cut and mounted. Removal of Bytac is a simple
peel-off process that leaves no sticky residue.
Features/Benefits:
• Inert to most chemicals
• Non-stick; easy to clean
• Use to resurface bench tops and line fume hoods
• Contrasting work surface for viewing color changes
during
titrations
• Protects surfaces against absorption of radioactive chemicals
Vinyl backing is recommended for all applications up to 200°F
(93°C).
General Purpose Bytac®
White Vinyl Backed
• Temperature range – Up to 200°F (93°C)
• Construction – .001" FEP film on .008" vinyl
• Adhesive – Pressure-sensitive
|
Part No. |
Width x
Length
in. x yds. |
Width x Length
mm. x m. |
|
D9860002
|
1 x 36
|
25 x 33
|
|
D9860003
|
2 x 36
|
50 x 33
|
|
D9860004
|
4 x 36
|
100 x 33
|
|
D9860005
|
12.5 x 5
|
320 x 4.6
|
|
D1069324
|
25 x 5
|
635 x 4.6
|
Aluminum foil-backing is resistant to high
temperatures up to 360°F
(182°C).
High Temperature Bytac®
Aluminum Foil Backed
• Temperature range – Up to 360°F (182°C)
• Construction – .001" FEP film on .002" aluminum
foil
• Adhesive – Pressure-sensitive
|
Part No.
|
Width
x Length
in. x yds.
|
Width x
Length
mm. x m.
|
|
D9860008
|
1 x 36
|
25
x 33
|
|
D9860010
|
2 x 36
|
50
x 33
|
|
D9860011
|
4 x 36
|
100
x 33
|
|
D9860012
|
12.5 x 5
|
320
x 4.6
|
|
D1069329
|
25 x 5
|
635
x 4.6
|
Suggestions For Use
• Rejuvenate old benches with Bytac.
• Expand your work surface by covering a table with Bytac.
• Line a fume hood to protect against damage from corrosives.
• Line the apron (ledge) at the front of the fume hood.
• Create a non-absorbent, contamination-free surface that can be washed
with chlorine bleach for clinical and biological labs.
• Make a splash screen behind the sink or work area for easy cleanups. |
